Mastheadgraphiconline

introduced 1987/discontinued 1989

A more highly specified version of the EOS 650. The top shutter speed is 1/4000 second, with flash synchronisation at 1/250 second. It is the first EOS with a Program Shift function and Auto Exposure Bracketing.

Type and major components
Type: 35mm autofocus, single-lens reflex camera with electronically-controlled automatic exposure, focal plane shutter and built-in motor drive.
Format:: 24 x36mm.
Usable Lenses: Canon EF lenses (full aperture metering only).
Standard Lens: EF 50mm f1.8.
Lens Mount: Canon EF Mount (electronic signal transfer system).
Viewfinder: Fixed eye-level pentaprism. Gives 94% vertical and horizontal coverage of actual picture area, and 0.8x magnification at infinity with a standard 50mm lens.
Dioptric Adjustment: Built-in eyepiece is adjusted to standard -1 diopter. (Eyepoint: 19.3mm).
Focusing Screen: Overall new laser-matte/AF frame. Six types of interchangeable screens are available optionally.
Mirror: Quick-return half-mirror with shock and noise absorber.
Viewfinder Information: Displayed at the bottom of the viewing area.
(1) 7-segment LCD digit and character display.
• Shutter speed - flashes at 2 Hz to give out-of-coupling range warning.
• Aperture value - flashes at 2 Hz to give out-of-coupling range warning.
• Metered manual exposure level - OP, oo, CL.
• Depth-of-Field AE (EOS 650 only) - dEP 1, dEP 2.
(2) LCD mask character display.
• * - AE lock indicator in partial metering mode.
• M - Manual exposure indicator.
• ? - flash charge completion indicator.
• +/- - exposure compensation indicator.
• ? - AF in-focus indicator (flashes at 8 Hz when AF is not possible).
Shutter: Vertical-travel focal plane shutter with soft-touch electromagnetic release. All speeds electronically controlled.
Shutter Speed: 1/4000-30 sec. and bulb. X-sync is 1/250 sec. Can be set in 1/2 step increments.
Self-Timer: Electronically controlled with a delay of approx. 10 sec. indicated by blinking LED operation confirmation lamp.

Autofocus
AF Control System: TTL-SIR (TTL secondary image registration) phase-detection type using BASIS (base-stored image sensor). AF operation starts when the shutter button is pressed halfway. AF in-focus indicator lights upon ranging completion. Audible indicator (electronic beeper) can be turned on and off.
Three selectable modes:
• One-Shot: AF operation ends and focus is locked once ranging is completed. Shutter does not release until ranging is completed.
• Servo: Focus continuously adjusts to follow the subject movement. Shutter can be released at any time regardless of ranging completion.
• Manual: By rotating the manual focusing ring after focus mode switch is set to ‘M’.
AF Working Range: EV1-18 at ISO 100.
AF Auxiliary Light: The ultra-bright red LED (peak sensitivity: 700nm) is automatically projected with specified Canon Speedlites.

Exposure control
Light Metering System:
TTL full aperture metering using SPC. Two selectable metering patterns: evaluative metering and partial metering (approx. 6.5% of the picture area). Stopped-down metering is not possible.
Exposure Modes:
• Shutter-Priority AE.
• Aperture-Priority AE.
• Intelligent Program AE.
• Program Shift Function.).
• Manual.
• Flash AE (A-TTL program flash AE and TTL program flash AE with specified Canon Speedlites).
Camera-Shake Warning: Operates for the program AE and aperture-priority AE modes. When automatically set shutter speed falls 0 to 0.5 steps below 1/focal length of the lens in use, the electronic beeper sounds. Beeper can also be turned on and off.
Metering Range: EV1-20 (EV 1 to 20 in normal temperature) with 50mm f1.4 lens at ISO 100 or equivalent.
Exposure compensation: +/- 5 steps in 1/2 step increments. Three continuous exposures are taken in sequence of underexposure, correct exposure according to camera’s meter and overexposure.
Multiple exposures: Presetting up to nine exposures is possible. Automatically cleared upon completion.

Film transport
Film Speed:
ISO 25-5000 is automatically set by 1/3 step according to DX code standard. ISO 6-6400 can also be set manually.
Film Loading:
After film positioning and back cover closure, the film automatically advances to the first usable frame and then stops (approx. 1.5 sec.).
Film Wind: Automatic using the built-in miniature motor. Confirmation by the film transport bar marks in the display panel.
Film Winding Mode: Two selectable modes; S (single exposure) and C (continuous exposure at the maximum speed of approx. 3 fps).
Film Rewind: Automatic using the built-in miniature motor. Starts when the film end is reached and then stops (with 24 exposure film, approx. 7 seconds). Mid-roll rewind performed by pressing the film rewind button.

Other specifications
Flash Contact:
Coupled directly to the camera by X-sync contact on the accessory shoe.
Automatic Flash (using the Speedlite 420EZ/300EZ with the camera set to ‘P’): A-TTL flash auto - Using the camera’s A-TTL program and the flash’s near-infrared preflash, the correct aperture value is automatically set. X-sync speed is also automatically set between 1/60 and 1/250 second upon flash charge completion. TTL control system which meters the light reflected from the film surface. Automatic fill-in flash is possible.
Grip: Interchangeable. GR20 (with remote control terminal) is standard. The large-size,
Depth-of-Field Check: By pressing the depth-of-field check button.
LCD Display Panel: Displays only the information required at the time, e.g. shooting mode, film winding mode, AF mode, shutter speed, aperture value, film speed or battery check. Timer function for eight secs. is provided; the display is held on for eight secs. after the switch i.e., shutter button is pressed. The display panel can be illuminated by electro-luminescence.

Power Source
Battery:
One 6V lithium battery pack (2CR5). Battery is replaced by removing grip.
Battery Check: By pressing the battery check button. Three energy levels are shown by the battery check bar marks in the display panel.
Back Cover: Interchangeable. Opened by sliding the latch with safety lock. Quartz Date Back E and Technical Back E can be attached.

Dimensions
Size:
148 (W) x 108.3 (H) x 67.5 (D) mm. 5 13/16” x 4 1/4” x 2 5/8”.
Weight: 700g (24 11/16 oz.) body only.

unfortunately we don't have an information section for this product yet. However, our website is being constantly updated so please check back soon.

unfortunately we don't have a press release section for this product yet. However , our website is being constantly updated so please check back soon.

key features
specifications
information

EOS 620

EOS 620

accessories

lenses

manuals

press release
reartab
item4
item20a
item14a

SUBSCRIBE HERE

item13a
item11a
item10a

Sign up to our free newsletter

EQUIPMENT:

Lenses

Speedlites

Digital cameras

Film cameras

item2a

HOME

MAGAZINE

EQUIPMENT

SHOP

LINKS

CLASSIFIEDS

FORUM

GALLERY

NEWS